DJI Phantom 4 Pro Plus With Built In Screen - P4PWBS 11549

Be the first to review this product

Be supplier

Availability: In stock

Excl. Tax: AED 10,999.05 Incl. Tax: AED 11,549.00

  • Intelligent Batteries

  • Sensor Redundancy

  • DJI Phantom 4 Pro + , 1-inch 20-megapixel CMOS

  • Six-camera navigation syste

Description

Details

The phantom 4 pro controller integrates an upgraded lightbridge hd video transmission system that adds 5.8 ghz transmission support. The ability to choose between 2.4ghz and 5.8ghz allows pilots to cut through interference and eliminates image lag caused when flying in an area with extensive 2.4ghz frequency use. This ensures the optimum range of a maximum video transmission of 4.3mi (7km)*.
A 5.5in 1080p screen integrated with the phantom 4 pro+ offers 1000 cd/m2 of brightness, more than twice as bright as conventional smart devices. It makes bright, vivid colors easily visible in direct sunlight. With this screen, a mobile device is not required, simplifying pre-flight preparations. As the dji go app is built into the screen, hardware and software can be fully optimized, further reducing video lag. Integration of an hdmi port, micro-sd card slot, microphone, embedded loudspeaker, and wi-fi connection allow images to be edited inside dji go to be shared almost instantly. Lastly, a five-hour battery life makes the phantom 4 pro + a complete aerial imaging solution.


CAMERA WITH 1-INCH 20MP SENSOR

The onboard camera has been redesigned to use a 1-inch 20-megapixel CMOS sensor. A custom engineered lens made up of eight elements is arranged in seven groups, it is the first DJI camera to use a mechanical shutter, eliminating rolling shutter distortion which can occur when taking images of fast moving subjects or when flying at high speed. In effect, it is as powerful as many traditional ground cameras. More powerful video processing supports H.264 4K videos at 60fps or H.265 4K at 30fps, both with a 100Mbps bitrate. Advanced sensors and processors ensure everything is captured with more image detail and the image data needed for advanced post-production.

FIVE-DIRECTIONS OF OBSTACLE SENSING

FlightAutonomy is expanded with an additional set of high-resolution stereo vision sensors placed at the rear in addition to the pair placed at the front as well as infrared sensing systems placed on the left and right sides. This network creates a total of five-directions of obstacle sensing and four-directions of obstacle avoidance, protecting the Phantom 4 Pro from more obstacles and giving filmmakers the confidence to capture more complex images.

REMOTE CONTROLLER WITH BUILT-IN SCREEN

The Phantom 4 Pro controller integrates an upgraded Lightbridge HD video transmission system that adds 5.8 GHz transmission support. The ability to choose between 2.4Ghz and 5.8Ghz allows pilots to cut through interference and eliminates image lag caused when flying in an area with extensive 2.4Ghz frequency use. Normally, Wi-Fi video transmission systems use a 2.4GHz frequency to work with a controller using a 5.8GHz frequency as this prevents interference that can occur when both use the same frequency. To perform normally, the video transmission system and the controller will interfere with each other causing image lag, especially if both use the same frequency. The use of two different frequencies has drawbacks in terms of flight performance. For example, flight performance will be affected when either of the two frequencies suffer interference.

The Lightbridge HD video transmission system used in the Phantom 4 Pro uses TDM (Time Division Multiplexing) to transmit signals, allowing it to send controller signals and receive video transmission signals at the same frequency. As the 2.4GHz frequency band is often affected by Wi-Fi, 4G cell towers, and other types of interference in urban areas, a 5.8Ghz band will increase transmission reliability. When switched on, the Phantom 4 Pro evaluates local signal levels, automatically choosing the transmission frequency with the lowest level of interference. This ensures the optimum range of a maximum video transmission of 4.3mi (7km)*

A 5.5in 1080p screen integrated with the Phantom 4 Pro+ offers 1000 cd/m2 of brightness, more than twice as bright as conventional smart devices. It makes bright, vivid colors easily visible in direct sunlight. With this screen, a mobile device is not required, simplifying pre-flight preparations. As the DJI GO app is built into the screen, hardware and software can be fully optimized, further reducing video lag. Integration of an HDMI port, Micro-SD card slot, microphone, embedded loudspeaker, and Wi-Fi connection allow images to be edited inside DJI GO to be shared almost instantly. Lastly, a five-hour battery life makes the Phantom 4 Pro + a complete aerial imaging solution.

Additional Info

Additional Info

Name DJI Phantom 4 Pro Plus With Built In Screen - P4PWBS
Brand DJI
Part No. P4PWBS
Features
  • All-new Dji Phantom Camera With 1-inch 20mp Exmor R Cmos Sensor
  • Remote Controller With Built-in Screen (5.5’,1080p,1000cd/m2)
  • Longer Flight Time, 30 Minutes Maximum Fight Time.
  • 4.3mi (7km) Control Range
  • 100 Feet (30m) Sensor Range
  • Avoid Obstacles Automatically
  • Smart Return Home Allows The Phantom To Avoid Obstacles As It Returns Home.
  • Activetrack

Reviews

Write Your Own Review

You're reviewing: DJI Phantom 4 Pro Plus With Built In Screen - P4PWBS

How do you rate this product? *

Rate it

Tags

Tags

Use spaces to separate tags. Use single quotes (') for phrases.