The company updated its Mikrotik PowerBox, releasing a model RB750P-PBr2. We draw your attention to the device ID, Updated PowerBox devices have index r2 (Revision 2) at the end of the identifier.
Specifications and update PowerBox
What has changed in the new revision? Old CPU Atheros AR7241 (AR7241-AH1A-R 400 MHz) has been replaced by a more powerful, it is already familiar to us from Hap lite and hEX lite chip QCA9531 (MIPS 24Kc V7.4), clocked at 650 MHz.Volume of RAM and non-volatile memory unchanged - 64, and 128 MB respectively.
There are 2 variants of the device power: first - powered directly from the DC-adapter 24V 2.5A, the bundled; second - powered via PoE (Passive PoE) to the first port (PoE-injector included). PowerBox is positioned primarily as a router for external use. Under the application of an external fixation means the mast, rack, tower, etc. Waterproof case allows the device to operate at temperatures from -35º to + 70º C. The manufacturer also provides RB750P-PBr2 can be fixed in a panel on a standard DIN-rail with a special adapter DIN-mount K-27, supplied.
To connect to the network at the PowerBox has 5 ports Ethernet 10/100 Auto-MDI / X with the screen. External operation of the device is to use a shielded twisted pair cable and, if necessary, - lightning protection module. By default, the 1st port is brought under the WAN, the remaining 4 are LAN-ports. Since the device is running a full RouterOS Level 4, port configuration, you can change as you wish. Ports with 2 to 5 minutes can be used to power external devices for PoE (PoE Out). Maximum load port - less than 1A, the total load on all of the ports - less than 2A. Such indicators allow you to connect to the device ports with high consumption.
In practice RB750P-PBr2 allows you to connect up to 4 devices Mikrotik SXT and / or Groove. You can connect other devices using PoE, the main thing that they supported the Passive PoE standard (4.5; 7.8) and supply voltage that is supplied to the PowerBox (6 to 30V). It may be other products Mikrotik, particularly RouterBOARD, and third-party device.
In general, PowerBox RB750P-PBr2 - reliable solutions for routing, as well as supplying power to the external PoE device, which allows easy connection of additional equipment and save you from unnecessary wires. This functionality is very useful when you need to create a small basic entry-level station or repeater to connect 2 wireless bridges. Built-in sensors allow you to monitor the internal temperature of the system supply voltage, which in the presence of SNMP allows to integrate the device with the network monitoring system, such as PRTG Network Monitor.
|Name||RB750P-PBr2 - MikroTik PowerBOX r2 5-Port Weatherproof Router|
|Buttons||Reset switch, voltage and temperature monitors|
|Temperature||-35 ℃ ... + 70 ℃|
• 1 x IEC cord
|Dimensions (mm)||125x178x48 mm|